|
DESCRIPTION: Ready mixed paste, free of; chlorinated
hydrocarbons, methylene chloride, phenol and other harmful
ingredients. Does not give off narcotic fumes.
USE: It is designed to remove: alkyd, oil based
varnishes, acrylic varnishes, polyurethane’s, enamel paint,
dispersion and latex paint.
DIRECTIONS: Apply liberally on surface. Remove after
required time with scraper. Intricate and carved sections can be
vigorously brushed with a stiff plastic brush. Apply a further
liberal coat and repeat until bare wood surface is visible. Wash
off any residue with a damp cloth or water. Do not use any metal
abrasives as this will cause rust marks to penetrate the wood
surface. Use sandpaper to remove any small traces of finish, once
the wood has completely dried out.
Veneer timber: Please test always beforehand.
RECOMMENDED STRIPPING TIMES: Note: In extremely hot
temperatures cover the treated area with plastic film.
- Varnish, shellac, French polish: 60-120 minutes
- Lacquers, polyurethane’s: 60-120 minutes
- Multi-layered paint: 60 + minutes
PACKAGING: 1 L and 4 L.
PRECAUTION: Avoid contact with skin and eyes. If contact
occurs, rinse well with water. Wear eye protection when using a
brush. Protective gloves recommended for prolonged exposure.
STORAGE: Keep tightly sealed in a cool and dry place. Do
not allow this product to freeze.
DISPOSAL: Do not pour left over paint stripper down the
drain. Unwanted paint stripper should be brushed out on newspaper,
allowed to dry and then disposed of via domestic waste collection.
Let empty container dry out as well and dispose via recycling
program.
The preceding information was prepared by BIO Products Australia
and is given as a general guide only. Some variations may occur or
be advisable for particular conditions. The manufacturer’s
responsibility for claims arising from breach of warranty,
negligence or otherwise is limited to the purchase price of the
material.
BIO PAINT STRIPPER is an environmental friendly product.
1/08/2007
View PDF
version |
