|
DESCRIPTION: A matt interior paint based on natural and
non toxic ingredients. Bio paint products are made from renewable
materials like plant oils, waxes, resins and pigments. They are
gentle to the climate and resources, as well as low odour and low
allergenic. The paint has a pleasant smell and is available
in a range of harmonious colours. For use on interior surfaces such
as plasterboard, solid plaster, concrete and mud brick. It is not
recommended for use on timber or on timber products such as medium
density fibro board, amazonite or particleboard. Bio Wall Paint
breathes, while conventional wall paints seal off the walls, which
can promote mould growth. Bio Wall Paint HD (Heavy Duty) has been
tested by the Department of Defense according to the Australian
Standard AS 1580 for scrub- resistant and dry hiding power. It is
therefore well suited for schools, restaurants, offices and public
buildings with heavy traffic areas. Suitable for use in wet areas.
Extreme low Volatile Organic Compounds (VOC) less than 1 gr. Per
Litre and does not contribute to smog and pollution. It contains no
lead, glycol derivates, aromatic hydrocarbons or styrene
compounds.
PREPARATION: Prepare the surface in accordance with AS
2311 - Painting of Buildings. The surface to be painted should be
smooth, dry and cleaned of greasy and dirty contaminants. New
plaster and concrete can be painted after 6 weeks. Remove stains,
watermarks, and soot etc. seal off with a solution of shellac: 250
grams
Shellac per 1 Litre mentholated spirit. Old lime and kalsomine
paint must be removed. Oil based and acrylic paint surfaces – semi
gloss or gloss - should be sanded with sandpaper. A test strip is
recommended on already painted surfaces if compatibility is in
doubt.
PRIMING: New, highly absorbent and crumbly surfaces must
be primed with BIO Wall Primer. Alkaline surfaces must be primed
first with a special conventional sealer to prevent saponification
of the paint. Plasterboard jointing cement should be left for 48
hours before painting.
APPLICATION: Stir thoroughly before use with a
broad flat stirrer. May be brushed, rolled or sprayed. Apply one
thick coat or two thin coats (may be thinned with water 5%-10% to
obtain a smooth flowing consistency). New Gyprock surfaces need two
or three coats initially. Airless spraying requires 200
bar/pressure with a nozzle of 0.28 mm Titan -adjustable- or 0.53 mm
with a fan angel of 50*-DEEP BASE: For better hiding power
use for the first coat BIO Wall Paint HD white. Followed by 1 to 2
coats of BIO Wall Paint HD Deep Base. We recommend using at least
10% pigments in a Deep Base system for better hiding.
DRYING: 2-4 hours at 20-23 C/50-55% Humidity. Fully dry
after 4-6 hours. May be recoated after about 4-6 hours. Allow
7 days for film to fully cure before washing. Under cold and damp
conditions allow a longer drying time. Do not use below + 5 C. Wet
film thickness 100 micron, dry film thickness: 41 micron.
COLOURS: Bio Wall Paints are supplied in base white or
deep base. Bio Pigments are available in a range of colours.
The customer tints to obtain the required colour, however, because
the tint is not paint in itself, a maximum of 1 part of tint to 1
part white is recommended. All tints are intermixable. The standard
colours are:
- Red
- Blue
- Violet
- Orange
- Golden
- Ochre
- Brown
- Yellow
- Black
- Green
Slight variations between colour lots are possible.
Mixing proportions for 4 Liter white Wall paint:
- 1:100 1%
40 ml of BIO Pigments
- 1:50
2% 80 ml of BIO Pigments
- 1:20
5% 200 ml of BIO Pigments
- 1:10 10% 400 ml of
BIO Pigments
- 1:1 50% 2000 ml of
BIO Pigments
CLEANING: Use warm, soapy water.
COVERAGE: 1 Liter will cover approx. 8 - 10 sqm. On
concrete and rough Surfaces 1 Litre covers approx. 3-5 sqm.
PACKAGING: White 250 ml, 1, 4 and 10 Litres. Tints
100 ml, 250 ml and 1 Litre.
INGREDIENTS: Castor oil, resins, lemon oil, aluminum
silicate, white earth pigments, china clay, iron oxides, metal
pigments, earth pigments, calcium carbonate cellulose, mineral oil,
borax, water, lecithin, etc., free of cadmium, chromates and lead
chromates.
STORAGE: Keep tightly sealed in a cool frost free place.
Seal well after using. Once opened, use as quickly as possible.
Keep out of the reach of children.
PAINT DISPOSAL: Do not pour left over paint down the
drain. Unwanted paint should be brushed out on newspaper, allowed
to dry and then disposed of via domestic waste collection. Let
empty paint container dry out as well and dispose via recycling
program.
The preceding information is given as a general guide only. Some
variations may occur or be advisable for particular conditions. Our
responsibility for claims arising from breach of warranty,
negligence or otherwise is limited to the purchase price of the
material.
BIO WALL PAINT and BIO PIGMENTS are environmental friendly
products.
BUY NOW from Online
Store
View PDF
version
|
