|
Range of application: For sealing solid interior timber
surfaces, e.g. for bathroom furniture, window sills and working
boards like oak, alder, beech, maple and others. Not to be used on
veneer, Multiplex boards, plywood or the interior of cabinets. To
improve the water resistance of surfaces coated with KUNOS Natural
Oil Sealer No. 244 or ARDVOS Universal Wood Oil No. 266, paint over
with KUNOS 243.
Technical qualities: Prevents temperature-caused
discoloration of light wooden surfaces, e.g. by warm drinks in
porcelain cups. Transparent, lustrous, open-pored, water resistant
according to DIN 68 861, part 1. Produces a surface finish after
2-3 applications. DIN 53 160 certified for color fastness when
exposed to perspiration and saliva DIN EN 71, part 3 certified as
suitable for toys.
Full declaration: Linseed oil-stand oil-natural resin
ester, orange oil, Isoaliphates, silicic acid, micronized wax and
drying agents free of lead.
Colors: 002 clear
Dilution: SVALOS Thinner No. 222, SVALOS Thinner No.
293.
Application method: By brush, roller or with a wadded
cloth (undiluted), or with spraying device (diluted with SVALOS
Thinner No. 293) at temperatures above 16°C (60°F). Test coat is
recommended
VARIATION OF USES:
Coverage: First coat: 1 undiluted liter is sufficient for
appr. 22 m2. Second coat: 1 undiluted liter is
sufficient for appr. 88 m2. Third coat: 1 undiluted
liter is sufficient for appr. 295 m2. Coverage depends
on surface condition and absorbency. Pre-testing your project is
recommended. For spraying: add 30 % max. SVALOS Thinner No.
293.
Cleaning: Clean equipment immediately after use with LEVO
Brush Cleaner No. 997.
Drying time: At 23oC (73oF) and 50%
relative humidity: First coat 16 hrs, subsequent coats 16 hrs,
final degree of hardening is reached after 4 weeks.
Specific gravity: Approximately 0.91 g/ml
Safety advice: Always be sure to store and then dispose
of cleaning cloths, polishing pads, sponges, etc. that are still
wet or even slightly moist with KUNOS Countertop Oil No. 243 in an
airtight metal container or in water, as there is a danger of
spontaneous combustion caused by the plant oil content. However the
product itself will not combust spontaneously. Contains limonene.
Keep out of the reach of children If swallowed do not induce
vomiting: Seek medical advice immediately and show this container
or label.
Disposal: According to locally regulated laws.
Container sizes: 0.25 l; 0.75l; 2.5 l; 10 l; 30 l;
200l.
Storage: Cool and dry. Please see label for expiry date.
Transfer unused portion of product to a smaller container for
storage.
How to use KUNOS
Countertop Oil No. 243
Wooden Surface:
Preparation: Wood must be dry (moisture content below 12 %), solid,
able to absorb, clean, free of resin and dust. Brush large-pored
wood such as oak, ash, chestnut, elm, mahogany or teak carefully,
to clean pore grooves. Sand furniture gradually up to 240 grain,
for oak use 180 grain.
Application: Depending on surface requirements and absorbency:
Apply 1 to 3 thin coats, until a surface layer has developed.
Remove excess oil approximately 3 minutes after applying the first
coat with a lint-free cloth, otherwise an uneven shiny surface
might develop. Sand with 400 grain between the 1st and
2nd applications. Remove 2nd coat 3 minutes
after application, sanding before the application of the
3rd coat is not necessary. Let dry. Remove
3rd coat 3 minutes after application as well. Between
the applications of the individual coats, let dry for at least 16
hours.
Care: Maintenance should be carried out according to
usage. As a rule 1 — 2 times annually. Prepare the surface with 280
— 320 grain, then rub or polish a thin coat of KUNOS Countertop Oil
No. 243. Clean with a damp cloth with TRENA pH-Neutral Cleaner No.
556 diluted in water.
Important tips: Stir thoroughly before use. Remove
possible skin formed on surface. Test coat is recommended. The open
time during the application can be extended by adding up to 10% of
SVALOS Thinner No. 293. On oak and other wood with
incompatibilities such as tannic acid or dyes, or on wood that has
been sanded, stripped, pre-treated, or stained, discoloration is
possible and will show up within one week of application date.
Please note that KUNOS No. 243 is not suitable as a sealant on
strained wood. For glued crosscut wood, observe a treated test area
for two days before completing application, as certain adhesives
may dissolve. Adhesives and glues have to be completely dry before
treating with KUNOS.
View pdf
version
These directions are the result of long years of research and
practical testing. They are backed by our most current expert
information. New findings may invalidate this information. This
data sheet is meant to serve as information and instruction. No
legal liability should be interpreted from it. In case of doubt,
please contact the retailer, wholesaler, or manufacturer. |
