|
DESCRIPTION: Use Volvox Wood Soap for care and
maintenance of Volvox oil finished timber floors and
furniture. Theproduct is adjusted to rejuvenate heavily used
and worn out oil finished surfaces. It is also suitableto
remove stains and marks.
APPLICATIONS: REGULAR CARE Stir product well and add up
to 20ml. to 10 litre of water. Use this solution to mop the
floor clean. Wipe surface dry after.
VARIATION OF USES:
REJUVENATING Mop floor clean. Stir product well. Apply one very
thin coat of Volvox Wood Soap with a moist (water) mop or cloth.
Repeat application until surface appears rejuvenated. Mob off soap
residues and Wipe surface dry after.
MARKS AND STAINS Stir product well and apply to the effected
area. Work the product in grain direction into the timber using a
cloth or lightly abrasive Scotch pad (white). Wipe clean after with
some water or moist mop. Wipe surface dry after.
CLEAN UP: Clean tools immediately with water after
use.
STORAGE: Store product cool, frost-free and in tightly
sealed container.
INGREDIENTS: Flax Seed Oil, Wood Oil, Rosin, Beeswax,
Carnauba Wax, Lead free dryers, Preservative, Seed
oilsoap.
SAFETY: Working rags and other fabrics soaked with
oil may self-ignite. Letdry safely outdoors on a cloth lineor store
in a sealed metal container. The product by itself willnot
self-ignite. Even if non-toxic, keep away fromchildren.
DISPOSAL: Allow unwanted oil to dry. Solid matter should
be disposed of via the normal garbage collectionservice.
DISCLAIMER: The user is recommended to test the product
on the intended surface to ensure its suitability.
HANDY HINTS AND TRICKS FOR FRESHLY OIL FINISHED FLOORS: Treat
your fresh oiled surface with care since oil needs to harden
for aperiod of 2 – 3 weeks.
NO WATER ON THE OILED SURFACE: After that a moist
mobbing ispossible. Do not use any detergent or other
additives in the mobbing water. Wipe surface dry
after.
Avoid micro fibre mops as they will extract oil from the timber.
Note that oil finished surfaces are permeable to vapour while
fluids and dirt is repelled. Some vapour of liquids can penetrate
the protective oil layer and can react with substances in the wood
such as tannic acid causing slight stains. These can easily be
removed by adding 20 ml. Volvox Hardwood Floor Renovator 5-871 to
10 litre of mobbing water. Moist mob the floor and Wipe Surface
dry after.
We recommend your oil finished floor to be checked and
maintained by your professional floor sander as we guarantee the
quality of the product only. We cannot guarantee for care and
maintenance of a floor.
View pdf
version |
